Nokia ESB26 User Manual page 162

14.
Argument Description
NAME The configuration name. The name length up to 31 characters (case sensitive).
Example
device-name(cfg protocol mstp)#name region1
Setting the Configuration Revision
The revision command, in Protocol MSTP Configuration mode, sets the MST configuration
revision number. The no form of this command returns to the default revision number.
By default, the revision number is 1.
Command Syntax
device-name(cfg protocol mstp)#revision <revision-number>
device-name(cfg protocol mstp)#no revision
Argument Description
revision-number
Example
device-name(cfg protocol mstp)#revision 1
Terminating the Configuration without Storing the MST Map
The abort command, in Protocol MSTP Configuration mode, exits Protocol MSTP
Configuration mode without saving the MST configuration map.
When the abort command is used, the changes in the VLAN ID to MSTI mapping will not be
saved. To save the changes in the VLAN ID to MSTI mapping, use the apply command in
Protocol MSTP Configuration mode.
NOTE
The apply command has the same effect as the exit command, or the shortcut key
<Ctrl+D>.
Command Syntax
device-name(cfg protocol mstp)#abort
Storing the MST Map and Terminating the Configuration
The apply command, in Protocol MSTP Configuration mode, saves the MST configuration
map and exits Protocol Configuration MSTP mode.
When using the apply command, the changes in the VLAN ID to MSTI mapping will be
saved. If you do not want to save the changes in the VLAN ID to MSTI mapping, use the
abort command in Protocol MSTP Configuration mode.
MN700004 Rev 01
Multiple Spanning Tree Protocol (MSTP)
The MST configuration revision number in the range <0-65535>.
151