Nokia ESB26 User Manual page 411

clean startup-configuration
The clean startup-configuration command, in Loader Configuration mode, sets the startup
configuration database in the permanent storage memory to the default values.
Command Syntax
Loader(config)#clean startup-configuration
clean log-history
The clean log-history command, in Loader Configuration mode, erases all the log history
records.
Command Syntax
Loader(config)#clean log-history
ip-address
The ip-address command, in Loader Configuration mode, changes the IP address of the
loader. This IP address is used only for manufacturing purposes. The change is effective after
restarting the switch.
Command Syntax
Loader(config)#ip-address [IP Address]
Argument Description
IP The switch MAC address.
Address
Example
Loader(config)#ip-address
A.B.C.D[/M] Set IP address (optionally with num. of subnet mask
bits)
Loader(config)#ip-address 192.168.0.12/24
New loader IP address = 192.168.0.12, subnet mask = ffffff00
WARNING: New IP address will take effect
after restart of the switch
manufacturing-details
The manufacturing-details command is password protected and is used for manufacturing
purposes only.
Command Syntax
Loader(config)#manufacturing-details
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
VI