Nokia ESB26 User Manual page 383

34.
1/1/1 0 0
1/1/5 1 1
Displaying the Configured RADIUS Servers
The show dot1x radius command, in Privileged (Enable) mode, displays all RADIUS servers
that are configured.
Command Syntax
device-name#show dot1x radius [statistic]
Argument Description
statistic (Optional). Display statistic information for the configured RADIUS servers
Example 1
device-name#show dot1x radius
Configured RADIUS Servers
Retransmit count
Timeout
DeadTime
=====================================================================
ID IP Address
---------------------------------------------------------------------
1 192.168.0.40
Example 2
device-name#show dot1x radius statistic
RADIUS server [192.168.0.40:1812]:
Sent Packets:
RADIUS Request:
Received Packets:
RADIUS Accept:
RADIUS Reject:
RADIUS Challenge:
RADIUS Unknown:
Displaying the 802.1X for a Specific Port
The show dot1x interface command, in Privileged (Enable) mode or the dot1x command in
Interface Configuration mode, displays the 802.1X for a specific port.
Command Syntax
device-name#show dot1x interface UU/SS/PP [detailed | statistic]
device-name(config-if UU/SS/PP)#dot1x
Argument Description
UU/SS/PP Interface's unit/slot/port.
detailed Displays detailed information for every supplicant on a specific port.
statistic Displays statistic information for a specific port.
MN700004 Rev 01
802.1X Port-Based Authentication
0 Auto
0 Auto
1
2
50 sec
0 sec
Port Status
1812 ALIVE
270
135
0
135
0
372
Per MAC In
Single Both
Key
configured
Status Time
00:55:42