Nokia ESB26 User Manual page 110

10.
Command Syntax
device-name#show snmp-server group
Example
device-name#show snmp-server group
group name: GR1
read view: READ
notify view: NOTIFY
device-name#
Displaying the SNMP Users
The show snmp-server user command, in Privileged (Enable) mode, displays the users and
their associated engine ID.
Command Syntax
device-name#show snmp-server user
Example
device-name#show snmp-server user
User name: MAG
Engine ID:1234567890
Group: GR1 model:v3 Auth
device-name#
Displaying All Configured Views
The show snmp-server view command, in Privileged (Enable) mode, displays all configured
views. This command displays the viewmask of a particular view if it is configured. If the
name of the view is specified, only data for the views with the specified name is displayed on
the screen. If the view name is not specified, all views are displayed on the screen. The view
name is not case-sensitive and can be entered partially. The viewmask length is 32B.
A view is displayed in symbolic format, when some portions of the viewfamily OID match
the OID, stored in file batm_oid_table. The symbol with the longest match of the OID is
assigned and concatenated with the unmatched OIDs.
Command Syntax
device-name#show snmp-server view [VIEW-NAME]
Argument Description
VIEWNAME (Optional) The name of the view. The view name is limited to 32 characters.
Example 1
The following example shows how to display a view family in symbolic format. The view
family has the following long OID:
1.3.6.1.2.1.4.24.4.1.192.168.0.0.255.255.0.0.0.192.168.4.1
MN700004 Rev 01
SNMP Server Configuration
security model: v3
write view:
row status:
99
auth
WRITE
active