Nokia ESB26 User Manual page 421

Argument Description
src-addr Hexadecimal source address (optionally prefixed with 0x).
dst-addr Hexadecimal destination address (optionally prefixed with 0x).
blk-len Hexadecimal or decimal block length (Use 0x prefix for hexadecimal number).
display
The display command, in Sysloader Memory mode, displays a block of memory, optionally
specified by start address and block length in bytes.
Without any arguments, the command repeats the previous display, if any, or the default (after
reload, the start address and block length are 0 and 256 respectively by default). If only the
start address is specified, the previous or default block length is repeated.
Command Syntax
device name(memory)#display [<st-addr> [<blk-len>]]
Argument Description
st-addr Hexadecimal start address (optionally prefixed with 0x).
blk-len Hexadecimal or decimal block length (Use 0x prefix for hexadecimal number).
fill
The fill command, in Sysloader Memory mode, fills a block of memory by the specified
hexadecimal value.
Command Syntax
device name(memory)#fill <st-addr> <blk-len> <value>
Argument Description
st-addr Hexadecimal start address (optionally prefixed with 0x).
blk-len Hexadecimal or decimal block length (Use 0x prefix for hexadecimal number).
value Hexadecimal byte value to fill (optionally prefixed with 0x).
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
XVI