Nokia ESB26 User Manual page 100

10.
•
Telnet access to the switch. For the use of named access list by telnet see
"Configuring a Telnet Connection".
•
Access of the SNMP users. For the use of named access list by SNMP see "SNMP
Server Configuration".
Table 10-2 Access List Commands
C o m m a n d
access-list
show access-lists
Default Access List Configuration
Table 10-3 shows the default parameters for the access list.
Table 10-3 Access List Default Configuration
P a r a m e t e r
Named access list
Exact match
Creating a Named Access List
The access-list command, in Global Configuration mode, configures an access list that
controls the inbound and/or outbound data traffic according to criteria specified in the
command arguments. The no form of this command removes the specified access list.
The access list defaults to an implicit deny statement for any condition that has not been
permitted.
Command Syntax
device-name(config)#access-list NAME {permit | deny} {A.B.C.D/M [exact-match]
| any}
device-name(config)#no access-list NAME [{permit | deny} {A.B.C.D/M }
Argument Description
NAME The access list name (spaces are not allowed and the first character must be a
letter).
permit Permits access for matching conditions.
deny Denies access to matching conditions.
A.B.C.D/M Source IP address and mask.
any Any IP address.
MN700004 Rev 01
SNMP Server Configuration
D e s c r i p t i o n
Creates an access list that controls inbound and/or outbound
data traffic according to specified criteria.
Displays the access lists of the routing protocols.
D e f a u l t V a l u e
Not created
Disabled
89