Nokia ESB26 User Manual page 386

34.
The dot1x debug commands will not be saved after reload.
By default, the debug is disabled.
Command Syntax
device-name#debug dot1x authsm {event | status | timers}
device-name#no debug dot1x authsm {event | status | timers}
Argument Description
event Debug state machine events.
status Debug state machine status.
timers Debug state machine timers.
Backend State Machine Debugging
The debug dot1x basm command, in Privileged (Enable) mode, enables the backend state
machine debugging. The no form of this command disables this debugging state.
The dot1x debug commands will not be saved after reload.
By default, the debug is disabled.
Command Syntax
device-name#debug dot1x basm {event | status | timers}
device-name#no debug dot1x basm {event | status | timers}
Argument Description
event Debug backend state machine events.
status Debug backend state machine status.
timers Debug backend state machine timers.
Specific Packet Debugging
The debug dot1x packet command, in Enable Mode, debugs 802.1X related packets. The no
form of this command turns off the packet debugging.
The dot1x debug commands will not be saved after reload.
By default, the debug is disabled.
Command Syntax
device-name#debug dot1x packet {all | eapol | radius} {recv | send}
[detail]
device-name#no debug dot1x packet {all | eapol | radius} {recv |
send} [detail]
Argument Description
all Debug all 802.1X related packets, no detail.
eapol Debug EAPOL packets.
MN700004 Rev 01
802.1X Port-Based Authentication
375