Nokia ESB26 User Manual page 305

25. Status Monitoring, Statistics and General Commands
switch_area1(config)#
service advanced-vty
The service advanced-vty command, in Global Configuration mode, enables advanced mode
VTY. The no form of this command disables advanced mode VTY.
When advanced mode VTY is enables, the switch bypasses View mode at login and accesses
Privileged mode directly. To access View mode, enter the disable command in Privileged
mode.
Command Syntax
device-name(config)#service advanced-vty
device-name(config)#no service advanced-vty
service terminal-length
The service terminal-length command, in Global Configuration mode, determines the limit
to the number of lines displayed on the terminal screen. The no form of this command resets
the default value of 20 lines. A value of zero removes the limit.
This configuration command applies to all VTY interfaces.
Command Syntax
device-name(config)#service terminal-length <0-512>
device-name(config)#no service terminal-length
Argument Description
0-512 Limit to number of lines displayed on the screen. 0 represents unlimited length.
System Time and Date
This commands described in this section set the system time and date. You need to set the
system time and date correctly for proper operation of key chains, and for keeping proper
track of events in logging messages.
Table 25-2 Time and Date Commands
C o m m a n d D e s c r i p t i o n
date Sets the system time and date.
show date Displays the current time and date.
show clock Displays the current time and date, and optionally the synchronization client (if
available).
MN700004 Rev 01 294