Software Upgrade And Reboot Options; Overview; Description Of Commands - Nokia ESB26 User Manual

23. Software Upgrade and Reboot
Options

Overview

The following kinds of commands are discussed in this chapter:
•
Copy commands – These commands allow you to download or save startup
and running configurations.
• Write commands – These commands allow you to display information on the
current configuration, store the current configuration on the switch's
NVRAM, or reload the factory-default configuration settings.
•
Reload commands – These commands allow you to reboot the switch with or
without saving the current configuration, or reload the factory-default
configuration settings.
• Show commands – These commands display information regarding the
switch configuration settings.
Note that each write command has an alias (or nearly alias) copy, reload or show command.

Description of Commands

Copy Commands
The Copy commands, summarized in Table 23-1, perform the following operations:
•
Download new software versions to the switch.
•
Save or load the start-up configuration.
• Save the start-up configuration as the running configuration.
Table 23-1 Copy Commands
C o m m a n d
copy application
copy startup-config
download-from
copy startup-config
upload-to
copy running-config
startup-config
MN700004 Rev 01
D e s c r i p t i o n
Downloads a new software version to the switch.
Loads a start-up configuration with the specified file name from a
remote server with the specified IP address.
Saves the start-up configuration on the remote server with the
specified IP address to the specified file name.
Saves the running-configuration as the startup configuration. The
command is equivalent to the write memory command.
272