Prerequisites; Default Tls Configuration; Configuring And Displaying Tls - Nokia ESB26 User Manual

22.
MIBs
No MIBs are supported by this feature.
RFCs
No RFCs are supported by this feature.

Prerequisites

When TLS is enabled, the priority classification on the received traffic is disabled and all the
packets are assigned the port's default priority. The packet's priority can also be based on the
IP ToS field.
The TLS ports must be set on a VLAN. The VLAN number could be any VLAN from the
VLAN range <1-4094> as long as the TLS uplink is tagged on this VLAN and the TLS user
is untagged on this VLAN.

Default TLS Configuration

Table 22-1 shows the default TLS configuration.
Table 22-1 TLS Default Configuration
P a r a m e t e r
Transparent LAN Services (TLS)
EtherType
Jumbo frame

Configuring and Displaying TLS

MN700004 Rev 01
Transparent LAN Services (TLS)
D e f a u l t
V a l u e
Disabled
0x9000
Disabled
267