Nokia ESB26 User Manual page 85

9.
prefer port
active port
show
show counter
show resilient-links
show resilient-links
counter
shutdown
Description of Commands
resilient-link
The resilient-link command, in Global Configuration mode, opens a specified Resilient-link
Configuration mode for settings of the specified resilient link.
When applied in a specified Resilient-link Configuration mode, the resilient-link command
changes the editing focus from the current resilient link to the newly specified resilient link.
The no form of the resilient-link command removes the specified resilient link from the list
of defined resilient links. The no form is also applied in Configuration mode.
The resilient-link command is disabled if Spanning Tree is enabled.
Command Syntax
device-name(config)#resilient-link <N>
OR
device-name(config-resil-link N1)#resilient-link <N2>
Removing a resilient link:
device-name(config)#no resilient-link <N>
Argument Description
N, N1, N2
Examples
1. Opening a specified Resilient-link Configuration mode:
device-name(config)#resilient-link 1
device-name(config-resil-link 1)#
2. Changing the mode to another resilient link:
device-name(config-resil-link 1)#resilient-link 2
device-name(config-resil-link 2)#
MN700004 Rev 01
Resilient Link
Designates the preferred port of the resilient link.
Designates the active port of the resilient link.
Displays a table of the configured resilient links.
Produces a table showing how many swaps each resilient link has
undergone in the current session.
Displays a table of the configured resilient links.
Produces a table showing how many swaps each resilient link has
undergone in the current session.
Disables the interface (receiving, forwarding and learning). For a detailed
description of this command, refer to "Ethernet Interface Configuration"
Any number in the range <1-32>
74