Nokia ESB26 User Manual page 236

18.
device-name(config-if UU/PP/SS)#no qos shaper [queue <value>]
Argument Description
queue <value> (Optional). The transmit queue with value in range of <0-7>.
rate <rate-size> The shaping rate in bps, represented by an integer followed by k, m or g
(Kilobits, Megabits or Gigabits per second) in the range <650Kbps – 1Gbps>).
Granularity is 650Kbps. Values not matching this granularity will be rounded.
burst <burst-size> The burst size in units of 4 Kilobits. The range is <1-4095>.
Example
The following example configures the transmit rate of 2M to the transmit queue 2. The show
qos shaper command displays the results:
device-name(config-if 1/1/1)#qos shaper queue 2 rate 2m burst 16
device-name(config-if 1/1/1)#end
device-name#show qos shaper
Interface 1/1/1
==================
qos shaper queue 2 rate 2M burst 64K
QoS Assignment Displaying Commands
Table 18-6 lists the commands to display the priority assignment.
Table 18-6 Available Priority Assignment Displaying Commands
C o m m a n d
show qos priority-txq-map
show qos drop-level
show qos shaper
Displaying the Mapping Assignments
The show qos priority-txq-map command, in Privileged (Enable) mode, displays the port
priority mapping.
Command Syntax
device-name#show qos priority-txq-map {UU/SS/PP | all}
Argument Description
UU/SS/PP The unit, slot and port of a specific interface.
all Displays the QoS configuration of the entire interface.
Example
device-name#show qos priority all
MN700004 Rev 01
Quality of Service
D e s c r i p t i o n
Displays the port priority mapping.
Displays the Drop level priority mapping.
Displays the transmit rate for the transmit queue.
225