Configuring And Displaying Gmrp - Nokia ESB26 User Manual

15. GARP Multicast Registration Protocol (GMRP)

Configuring and Displaying GMRP

Table 15-2 lists the GMRP commands.
Table 15-2 GMRP Commands
C o m m a n d
show gmrp
gmrp
Displaying the GMRP Status
The gmrp command, in Protocol Configuration mode, and the equivalent show gmrp
command in Privileged (Enable) mode, display the current GMRP status of the switch,
enabled or disabled.
Command Syntax
device-name(cfg protocol)#gmrp
device-name#show gmrp
Example 1
device-name(cfg protocol)#gmrp
GMRP enabled
Example 2
device-name#show gmrp
GMRP enabled
Changing the GMRP Status
The gmrp command, in Protocol Configuration mode, changes the switch's GMRP status to
enable or disable.
By default, GMRP is disabled.
NOTE
1. You must enable GVRP before enabling the GMRP.
2. You must define the system VLAN range before enabling the GMRP.
Command Syntax
device-name(cfg protocol)#gmrp {enable | disable}
MN700004 Rev 01
D e s c r i p t i o n
Displays GMRP status.
Changes the GMRP status.
188