Nokia ESB26 User Manual page 364

32. Remote Authentication Dial-In User Service (RADIUS)
radius-server key
The radius-server key command, in Global Configuration mode, specifies the password used
between the switch and the RADIUS server. The no form of this command removes the
password.
Command Syntax
device-name(config)#radius-server key STRING
device-name(config)#no radius-server key
Argument Description
STRING The shared secret text string used as a password between the switch and the RADIUS
server.
radius-server retransmit
The radius-server retransmit command, in Global Configuration mode, specifies the number
of times the switch transmits each RADIUS request to the server before giving up (default is
three). The no form of this command restores the allowed number of retransmissions to the
default value of 3.
Command Syntax
device-name(config)#radius-server retransmit <count>
device-name(config)#no radius-server retransmit
Argument Description
count Number of allowed retransmissions, in the range <1-30>
radius-server timeout
The radius-server timeout command, in Global Configuration mode, specifies the number of
seconds a switch waits for a reply to a RADIUS request before retransmitting the request. The
default value is 3 seconds. The no form of this command restores the default value.
Command Syntax
device-name(config)#radius-server timeout <seconds>
device-name(config)#no radius-server timeout
Argument Description
seconds Number of seconds between retransmissions, in the range <1-60>
radius-server deadtime
The radius-server deadtime command, in Global Configuration mode, specifies the number
of minutes a RADIUS server, which is not responding to authentication requests, is passed
MN700004 Rev 01 353