Nokia ESB26 User Manual page 330

27.
device-name(config)#monitor temperature
Argument Description
enable Enables monitoring of the temperature.
disable Disables monitoring of the temperature.
celsius Sets the scale for temperature monitoring to Celsius.
fahrenheit Sets the scale for temperature monitoring to Fahrenheit.
Example
device-name(config)#monitor temperature fahrenheit
device-name(config)#monitor temperature
device-name(config monitor temperature F)#
NOTE The prompt of the temperature monitoring configuration mode indicates the temperature
monitoring scale setting – C for Celsius or F for Fahrenheit.
Configuring Individual Periodic Monitoring Indicators
Table 27-6 lists the commands used to configure specific periodic monitoring indicators. You
must enter into the specific monitoring indicator's configuration mode to use these
commands. To see how to enter into each indicator's configuration mode, see table 27-5.
Table 27-6 Periodic Monitoring Configuration Commands
C o m m a n d D e s c r i p t i o n
enable Enables the periodic monitoring for a specific indicator.
disable Disables the periodic monitoring for a specific indicator.
default Restores the indicator's monitoring configuration to its default settings.
period Sets the polling interval for monitoring.
log Sends log messages for alert conditions by using the Syslog server.
trap
Enables trap alert notification options for a single indicator.
limit Sets a limit value to trigger alerts.
delta Sets a delta value to trigger alert conditions.
Enabling Periodic Monitoring for a Specific Indicator
The enable command, in Monitoring Configuration mode, enables the periodic monitoring
for a specific indicator.
For default values, see table
MN700004 Rev 01
Periodic Monitoring
27-2.
319