Web Server Commands - Nokia ESB26 User Manual

25. Status Monitoring, Statistics and General Commands
Command Syntax
device-name(config)#log remote A.B.C.D
device-name(config)#no log remote [A.B.C.D]
Argument Description
A.B.C.D
Example
The following command enables remote logging to host 192.1.22.14.
device-name(config)#log remote 192.1.22.14

Web Server Commands

Table 25-4 summarizes the web server commands.
Table 25-4 Web Server Commands
C o m m a n d
web-server
show web-server
web-server
The web-server command, in Global Configuration mode, enables the use of the web server
(BiNOSView). The no form of the command disables use of the web server. By default, the
web server is enabled.
Command Syntax
device-name#web-server
device-name#no web-server
show web-server
The show web-server command, in Privileged (Enable) mode, displays the web server status.
Command Syntax
device-name#show web-server
MN700004 Rev 01
IP address of the syslog host.
D e s c r i p t i o n
Enables the web server (BiNOSView).
Displays the web server status.
300