Descriptions Of Input And Outputs - Technical Specifications; Video Interfaces - Technical Specifications - Teledyne 804A User Manual

804 Series Video Test Generator – User Guide
Descriptions of Input and Outputs – Technical Specifications
3
This section describes the video and audio interfaces on the 804/804A/804B instrument:
3.1

Video Interfaces - Technical Specifications

Table 3-1 below describes the video interfaces on the 804/804A/804B instrument, these interfaces are used to render test
patterns for testing consumer electronic HDTVs and computer displays.
Note: All video interfaces on the 804/804A/804B shall be connected to only SEL V / double insulated circuits of other devices.
Note: SPDIF and Optical audio input connectors are not available on the newer 804 and 804A units.
Table 3-1: 804/804A Video Interfaces
Video Connector
HDMI (4) Output Type A
3 BNC
Page 6
Description
Menu Selection: HDMI
Bit Depth: 24/30/36 bit.

Video type: RGB, YCbCr.

Sampling: 4:4:4, 4:2:2 (and 4:2:0 for 4K formats on the 804A) .

Pixel rate (804): Timings up to 1080p60 (up to 165MHz).

Pixel rate (804A): HDMI timings up to 4K x 2K at 30Hz (up to 300MHz) as specified by the HDMI 1.4a

specification and 4K x 2K at 50/60Hz with 4:2:0 pixel encoding as specified by the HDMI 2.0 specification.
Pixel rate (804B): HDMI timings up to 4K x 2K at 50/60Hz (up to 600MHz) with 4:4:4 pixel encoding as

specified by the HDMI 2.0 specification.
 Audio: LPCM, Dolby Digital and DTS (more details below).
Menu Selection: DVI for DVI Single Link (HDMI to DVI adapter cable).
 Video type: RGB.
Menu Selection – Format Type: BNC + S-Video + CVBS (when ED/HD is selected)
 Video type: YPbPr.
Bit Depth: 24 bit color depth.

Pixel rates: 27MHz, 27.027MHz, 74.176MHz, 74.25MHz (max 80MHz; resolutions greater than 80MHz

use pixel doubling).
 Sync type: Composite.
Revision B3