Specifications And Approvals; Specifications; Table 2-1: T700 Dilution System Specifications; Table 2-2: T700 Dilution Electrical And Physical Specifications - Teledyne T700 Operation Manual

SPECIFICATIONS AND APPROVALS

2.

2.1. SPECIFICATIONS

Table 2-1: T700 Dilution System Specifications

Parameter
Flow Measurement Accuracy
Repeatability of Flow Control
Linearity of Flow Measurement
Flow Range of Diluent Air
Flow Range of Cylinder Gases
Zero Air Required
CAL Gas Input Ports
Diluent Gas Input Ports
Response Time

Table 2-2: T700 Dilution Electrical and Physical Specifications

Parameter
AC Power
Actual Power Draw
Analog Outputs
Analog Output Ranges (Test
Channel)
Analog Output Resolution
Standard I/O
Optional I/O
Operating Temperature Range
Humidity Range
06873B DCN6388
1.0% of Full Scale
0.2% of Full Scale
0.5% of Full Scale
0 to 10 SLPM – Optional Ranges: 0 to 5 SLPM; 0 to 20 SLPM
0 to 100 cc/min – Optional Ranges: 0 to 50 cc/min; 0 to 200 cc/min
10 SLPM @ 30 PSIG Optional: 20 SLPM @ 30 PSIG
4 (configurable)
1
60 Seconds (98%)
85V-264V, 47Hz-63Hz
At 115V ~ Start up: 110 W, Steady State: 140 W
At 230V ~ Start up: 159 W, Steady State: 148 W
1 user configurable output
10V, 5V, 1V, 0.1V (selectable)
Range with 5% under/over-range
1 part in 4096 of selected full-scale voltage (12 bit)
1 Ethernet: 10/100Base-T
2 RS-232 (300 – 115,200 baud)
2 USB device ports
12 opto-isolated digital control outputs
12 opto-isolated digital control inputs
8 opto-isolated digital status outputs
1 USB com port
1 RS485
Multidrop RS232
5-40ºC
0 - 95% RH, non-condensing
Specification
Specification
27