The Configuration Menu Structure; Selecting Menu Options - Xante Assel-a-Writer-8300 Instruction Manual

The Configuration Menu Structure

Use the configuration menus to set up and change your printer default
settings through the front panel. This section explains and gives an
example of configuring your printer using the menu structure and covers
resetting to factory defaults. The printer's quick reference sheet in the
back of this manual illustrates the menu structure.

Selecting Menu Options

Use the front panel menus to set up your printer to communicate
with your host computer and to change printer default settings.
Note: Four printer keys have arrows to indicate their use within the
menu structure (the Reset ↑ key, the Enter ↓ key, the Menu
→ key, and the Test ← key). See "Front Panel Keys" earlier
in this chapter for details.
To enter the menu structure and make selections
1. Make sure the printer is on and idle.
Press the Menu → key to enter the menu structure. The last
2.
main menu you were in appears in the window.
Continue pressing the Menu → key until the desired menu
3.
appears.
Press the Enter ↓ key to select the desired menu and access the
4.
next menu level down. One of the options within the selected
menu appears.
Press the Menu → key until the desired submenu/option
5.
appears. If the option is not capitalized, go to step 6. If it is
capitalized, it is already the current selection. Go to step 7 to
make further selection or to step 8 to exit the menu structure.
5-8 Configurationbb ______________________________________