Table of Contents
Advertisement
Getting Set-up (continued)
Fig. 23 Adjust end guide (B4, A3, 11" x 17").
Limit
Mark
Lift Plate
Fig. 24 Load the paper.
Fig. 25 Set media size dial.
Fig. 26 Reinstall the cassette cover.
Fig. 27 Reinstall the multipurpose cassette.
Connecting the Power Cord
Fig. 28 Make sure power switch is off.
7
Fig. 29 Connect the power cable to printer.
Status Lights
Two status lights, or LEDs (Light
Emitting Diodes), indicate various printer
status conditions according to their on, off,
or blinking patterns.
The following chart defines each condi-
tion and its related light pattern. For addi-
Advertisement
Table of Contents
