To Display Hba Port Information - Hitachi XP P9500 User Manual

No summary
displayed
Physical
Device
--
--
Legend:
--: Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -item
parameter.
- all was specified.
- No value was specified for the parameter.
#2
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -c -item
parameter.
- No value was specified for the parameter.

To display HBA port information

-hba
Use this parameter to display information about the paths that pass
through each HBA port. HDLM displays the unique HBA port ID assigned
to each HBA port. This HBA port ID is used in monitor operations, and
can also be used in Offline and Online operations. Table
6-58
Displayed item
Summary
displayed
--
#1
Paths
OnlinePaths
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
• -: Indicates that intermittent error monitoring
is disabled or the monitoring time for an
intermittent error is out of range.
• A value of at least 0: Indicates the number of
errors that occurred during intermittent error
monitoring.
• *: Indicates that an intermittent error occurred
(automatic failback does not check the path).
SCSI device configuration information. The names
of the physical device files under the /devices
directory are displayed.
Total number of the paths recognized by HDLM for
the LU to be displayed.
Number of online paths among the paths recognized
by HDLM for the LU. When the value of Paths is
equal to the value of OnlinePaths, all paths are
online. If the value of OnlinePaths is less than that
of Paths, some paths might have an error status, in
which case you should check the status of individual
paths and take resolve the problem for any paths
that have an error status.
Table 6-18