To Display Program Information For A Host; To Display Program Information For A Remote Management Client - Hitachi XP P9500 User Manual

[ --passthroughauthpackage=PASSTHROUGHAUTHPACKAGE ]
[ --portnumber=PORTNUMBER ]
[ --protocol=PROTOCOL ]
[ --savesessionfile=SAVESESSIONFILE ]
[ --servicepath=SERVICEPATH ]
Valid value
Error-Monitor-Interval
Number-Of-Times
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
>
Example 3
The following example displays the format of the operation for a remote
management client:
>dlnkmgr -l set -help
set:
Format
dlnkmgr -l set { -lic
Valid value
AudlogLevel
Category-Value
all)
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
>
view (Displays Information)
The dlnkmgr command's view operation displays HDLM program information,
path information, and LU information.
Format

To Display Program Information for a Host

dlnkmgr [-s host-name -u user-name -p password] view -sys
[-sfunc|-satp|-rule]
[-t]

To Display Program Information for a Remote Management Client

dlnkmgr -l view -sys
6-22
| -audlog on [ -audlv AudlogLevel ]
| -audlog off
}
[-s]
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
{ 1 - 1440 }(Minutes) (Default Value 30)
{ 1 - 99 }(Times)
[ -category Category-Value ]
{ 0 - 7 }
{ [ss] [a] [ca] |
all } (Default Value
(Default Value 3)
(Default Value 6)