Specifying Whether A Logical Unit Is To Be Managed By Hdlm (When Using Sun Cluster); Changing An Hdlm-Managed Device To A Non-Hdlm-Managed Device - Hitachi XP P9500 User Manual

Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Specifying Whether a Logical Unit Is To Be Managed by HDLM (When
Using Sun Cluster)

Changing an HDLM-Managed Device to a Non-HDLM-Managed Device

Note
¢
¢
To change an HDLM-managed device to a non-HDLM-managed device:
1
Log in to Solaris as a user with root permissions.
.
2
Check the devices to be changed to non-HDLM-managed devices.
.
The shaded portion indicates the LDEV information about the LU that is to
be removed from HDLM management.
3
If setup is being performed for Quorum devices and disk device groups in
.
the LU that you want to remove from HDLM management, release the LU
settings.
When you unregister the SDS or SVM diskset, the diskset data will be
deleted so first back up any necessary data. For details on how to release
settings for Quorum devices and VxVM disk groups, see
Cluster Settings on page 3-166
page
For details on how to release settings for SDS or SVM disksets, see
Remove SDS Settings on page 3-169
3-170
4
Edit the HDLM driver unconfiguration definition file (/opt/
.
DynamicLinkManager/config/dlmfdrv.unconf).
Using a text editor, edit the definitions in the HDLM driver unconfiguration
definition file (/opt/DynamicLinkManager/config/dlmfdrv.unconf) for
the LU that you want to remove from HDLM management. Based on the
LDEV information of the LU that you want to remove from HDLM
management checked in step 2 (shaded portion), find the target LU in the
HDLM driver unconfiguration definition file (/opt/DynamicLinkManager/
config/dlmfdrv.unconf), and delete the hash mark (#) in front of the
LDEV property line corresponding to the LU. Deleting the hash mark
When you remove an HDLM-managed LU from management, perform
the remove operations on all nodes in the cluster, and make the
configuration the same on each node.
When you remove an HDLM-managed LU from management, restart
the host.
3-165.
of
Preparations for HDLM Uninstallation on page
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
of
Preparations for HDLM Uninstallation on
or
Remove SVM Settings on page
Remove Sun
3-165.
4-47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents