Notes On A Device Manager Agent; Installing Hdlm; Preparations For A New Installation Of Hdlm; Operations Required For Devices To Be Managed By Hdlm - Hitachi XP P9500 User Manual

Command suite for linux(r)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Notes on a Device Manager Agent

When installing HDLM on a host where Device Manager agent 5.0 or later
is installed, do not execute any of the following commands of Device
Manager agent during installation:
hbsasrv, HiScan, hdvmagt_account, hdvmagt_schedule, hldutil, TIC

Installing HDLM

The following section describes how to install HDLM for a new installation, for
a re-installation, and for an upgrade installation. Depending on the
procedure, the host might have to be restarted after HDLM is installed. HDLM
can also be installed by performing an unattended installation, which enables
a user to install HDLM without entering information. Select the procedure
suitable for your environment.
To create an HDLM device, the HDLM configuration definition utility
dlmcfgmgr is used. For details on the dlmcfgmgr utility, see
for Managing the HDLM Configuration on page
If you want to install HDLM in a boot disk environment that uses SCSI
devices, see
HDLM supports md devices in a Red Hat Enterprise Linux AS4/ES4
environment. If you want to perform a new installation of HDLM in an
environment where an md device has been activated, see
md Device Environment on page

Preparations for a New Installation of HDLM

This section describes the preparations required before newly installing
HDLM. This includes backing up devices to be managed by HDLM and setting
up the hardware and volume management software.

Operations Required for Devices to Be Managed by HDLM

If any devices to be managed by HDLM are operating, you need to perform
the following procedure.
To prepare a device that is already operating:
1
Terminate all processes of applications that are accessing devices to be
.
managed by HDLM.
2
If necessary, back up all devices that are to be managed by HDLM.
.
3
Unregister the devices.
.
If a device to be managed by HDLM is registered in a program, including
cluster software (excluding the volume management software), release
the registration.
Installing HDLM for Managing Boot Disks on page
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
7-22.
3-158.
dlmcfgmgr Utility
3-101.
Using HDLM in an
3-75

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dynamic link manager

Table of Contents