Notes On Using The Hitachi Network Objectplaza Trace Library; Displaying The Hitachi Network Objectplaza Trace Library Setup Menu - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (422 pages) ,
- User manual (640 pages)
Table of Contents
Advertisement
mind that programs other than HDLM also use them. If an earlier Hitachi
Network Objectplaza Trace Library (HNTRLib) is already installed, the settings
will not be inherited.
Notes on Using the Hitachi Network Objectplaza Trace Library
Note the following when using Hitachi Network Objectplaza trace library:
•
If HNTRLib has already been installed when you install HDLM, the settings
in the trace library will not be inherited by HNTRLib2. HDLM uses the
HNTRLib2 default settings.
•
If HNTRLib2 has already been installed on a host when you install HDLM,
the settings in the trace library will be inherited.
•
If a different Hitachi product is using HNTRLib2 when you attempt to
uninstall HDLM, HNTRLib2 will not be uninstalled
Displaying the Hitachi Network Objectplaza Trace Library setup
Menu
To display the Hitachi Network Objectplaza Trace Library setup menu:
1
Log in as a user with root permissions.
.
2
Execute the following command:
.
# /opt/hitachi/HNTRLib2/bin/hntr2utl2
The Hitachi Network Objectplaza Trace Library setup menu appears.
If you do not want to change the settings, type e and then press the
Enter key to quit the menu.
The following explains how to modify each setting.
3-130
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Advertisement
Table of Contents
