Migration By Installing Hdlm In The Existing Local Boot Disk Environment - Hitachi XP P9500 User Manual

This step and the next step set the LU to be used for the post-migration
boot disk as an HDLM-managed LU.
5 Restart the host with the reconfiguration option specified to make the
.
settings valid and the HDLM device recognizable.
Execute one of the following commands:
¢
¢
After you finish these steps, perform the procedure described in
the Post-Migration Environment on page

Migration by Installing HDLM in the Existing Local Boot Disk Environment

Perform the steps below in the pre-migration environment. The workflow is
shown in
installing HDLM in the existing local boot disk environment on page
# reboot -- -r
boot -r (at the ok prompt)
Figure 3-9 Flow of setting up the boot disk environment when
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-85.
Setting Up
3-80.
3-79