Performing A New Installation Of Hdlm (When Sun Cluster Is Being Used) - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (188 pages) ,
- User manual (422 pages)
Table of Contents
Advertisement
NewHDevName
DskName
iLU
21
Based on the results of step 20, compare the logical device file names
.
from before and after the HDLM 7.2 installation, and re-register the
correct HDLM devices in programs that use HDLM devices.
Once installation is complete, check the path information according to the
procedures listed in
whether HDLM has been installed correctly or not.
Performing a New Installation of HDLM (When Sun Cluster Is Being
Used)
Note
Do not restart any nodes until you have finished installing HDLM on all
nodes.
To perform a new installation of HDLM:
1
When the license key file has been provided, store the license key file
.
directly under the /var/tmp/ directory by using the hdlm_license name.
/var/tmp/hdlm_license
If the /var/tmp/hdlm_license file does not exist, you will be required to
enter a license key in step 13.
Notes
¢
¢
¢
2
Log in to Solaris as a user with root permissions.
.
3
Execute the format command to make sure that the sd or ssd device to
.
be managed by HDLM is displayed.
3-56
Item
Indicates the HDLM 7.2 logical device file name (HDevName). If a
hyphen (-) is displayed, the corresponding HDev does not exist
after the HDLM 7.2 installation.
Indicates the storage system name.
Indicates the LU number in the storage system.
Checking the Path Configuration on page 3-119
The license key file can be saved as a user-specified directory or a file
name. However, this license key file is not deleted after installation.
Delete this file manually after installation is completed if it is not
necessary.
Available characters for the absolute path of the license key file are as
follows:
Upper case and lower case characters, numbers, and some special
characters (/, !, #, +, -, ., =, @, _, ~)
Except when performing an unattended installation of HDLM, if a user-
specified license key file is used by entering /var/tmp/hdlm_license,
this license key file is deleted after installation has completed.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
to check
Advertisement
Table of Contents
