Hdlm Resident Processes; Changing The Configuration Of The Hdlm Operating Environment; Changing An Hdlm Management-Target Device; Adding An Hdlm Management-Target Device - Hitachi XP P9500 User Manual

When the HDLM Manager column shows Dead, the HDLM manager is inactive.

HDLM Resident Processes

Table 4-1 HDLM resident processes on page 4-15
resident processes in HDLM. To monitor these processes, use the names
below.
Process
dlmmgr
hbsa_service
hntr2mon
#
You only need to monitor this process when HDLM is linked to Global Link
Manager.
Changing the Configuration of the HDLM Operating
Environment
This chapter describes the procedures for changing the configuration of an
HDLM operating environment.

Changing an HDLM Management-Target Device

This subsection explains how to add and delete HDLM management-target
devices and how to change their attributes.

Adding an HDLM Management-Target Device

Connect the device to the system and execute the following command:
# cfgmgr

Deleting an HDLM Management-Target Device

1 Execute the following command to check the device (hdisk) to be deleted:
.
# /usr/DynamicLinkManager/bin/dlnkmgr view -path
2 Stop all processes and services that are using the device that is to be
.
deleted.
3 Execute the following command to unmount the file system that uses the
.
device that is to be deleted:
# umount file-system-mount-point
Table 4-1 HDLM resident processes
HDLM manager process
Hitachi Command Suite Common Agent Component
Hitachi Network Objectplaza Trace Library (HNTRLib2) process
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for AIX(R))
lists and describes the
Description
#
process
4-15