Viewing License Information; Updating The License - Hitachi XP P9500 User Manual

For example, to set up the error log collection level, execute the dlnkmgr
command's set operation with the -ellv parameter specified. When the
confirmation message is displayed, enter y to execute, or n to cancel the
command.
The following shows an example in which the command is executed:
>dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
>
To check whether the settings have been applied, perform the procedure
described in

Viewing License Information

This section explains how to display license information.
To display license information, execute the dlnkmgr command's view
operation with the -sys and -lic parameters specified.
The following shows an example in which the command is executed.
>dlnkmgr view -sys -lic
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
>
For details on the displayed items and their descriptions, see
Information) on page

Updating the License

This section explains how to update the license.
To update the license, execute the dlnkmgr command's set operation with
the -lic parameter specified. When the confirmation message is displayed,
enter y to execute, or n to cancel the command. If the license key file does
not exist, a message asking you to enter the license key appears, so enter
the license key.
Note:
When you are executing the dlnkmgr command's set operation with the -
lic parameter to install the license, you can only execute it once at a
time. If you attempt to execute more than one dlnkmgr command
containing the set operation with the -lic parameter, the following
message might appear and HDLM might terminate abnormally:
KAPL01075-E A fatal error occurred in HDLM. The system
4-10
Viewing the Operating Environment on page
-
6-29.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Windows(R))
4-8.
view (Displays