Setting The Error Log File Size; Setting The Number Of Error Log Files; Setting The Trace File Size - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (188 pages) ,
- User manual (422 pages)
Table of Contents
Advertisement
might decrease, or trace information required to analyze the cause of an
error might be overwritten.
The following is an example of setting up the trace level by using a
command:
# /usr/DynamicLinkManager/bin/dlnkmgr set -systflv 1
Specify the trace level in as a number.
Setting the Error Log File Size
The error log file size (the HDLM manager log (dlmmgrn.log (n indicates a file
number from 1 to 16))) can be set.
You can specify a value (in kilobytes) from 100 to 2000000 for the error log
file size. The specified value is applied for HDLM manager logs.
When an error log file reaches the specified size, the information in the old
error log file is replaced with new information, beginning with the oldest file.
By specifying both the log file size and the number of log files, you can collect
up to 32000000KB (approximately 30 GB) of error logs in total.
The following shows an example of executing the command to set the error
log file size.
# /usr/DynamicLinkManager/bin/dlnkmgr set -elfs 1000
Specify the size of the error log file in kilobytes.
Setting the Number of Error Log Files
The number of the error log files (the HDLM manager log (dlmmgrn.log (n
indicates a file number from 1 to 16))) can be set.
You can specify a value from 2 to 16 for the number of error log files (log files
for the HDLM manager).
By specifying both the log file size and the number of log files, you can collect
up to 32000000KB (approximately 30 GB) of error logs in total.
The following shows an example of setting the number of error log files.
# /usr/DynamicLinkManager/bin/dlnkmgr set -elfn 5
Specify the number of error log files in numbers.
Setting the Trace File Size
The trace file size can be set.
Trace files for which a trace file size can be set are hdlmtrn.log (n indicates
a file number from 1 to 64). The length of a trace file is fixed, regardless of
how much trace information is actually in the file.
For the trace file size, you can specify a value (in kilobytes) from 100 to
16000. If you specify a value smaller than the setting value, the message
3-74
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Advertisement
Table of Contents
