DGS-1250 Series Gigabit Ethernet Smart Managed Switch CLI Reference Guide
Command Mode
EXEC Mode.
Usage Guideline
Use this command to change the login account. Three attempts are allowed to log into the Switch's interface.
When using Telnet, if all attempts fail, access will return to the command prompt. If no information is entered within
60 seconds, the session will return to the state when logged out.
Example
This example shows how to login with username "user1".
Switch#login
Username: user1
Password: xxxxx
Switch#
2-6
logout
This command is used to close an active terminal session by logging off the Switch.
logout
Parameters
None.
Default
None.
Command Mode
EXEC Mode.
Usage Guideline
Use this command to close an active terminal session by logging out of the device.
Example
This example shows how to log out.
Switch#logout
2-7
end
This command is used to end the current configuration mode and return to the highest mode in the CLI mode
hierarchy, which is the EXEC Mode.
11