Logout - D-Link DGS-3100 SERIES Cli Manual

Parameters
Restrictions
Example usage:
To initiate the login procedure:

logout

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To terminate the current user's console session:
ping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To ping the IP address 10.6.150.34 three times:
None.
None.
DGS3100# login
UserName:
To log out a user from the Switch's console.
Logout
The logout command terminates the current user's session on the
Switch's console.
None.
None.
DGS3100# logout
To test the connectivity between network devices.
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
The ping command sends Internet Control Message Protocol
(ICMP) echo messages to a remote IP address. The remote IP
address then 'echos' or returns the message. This is used to confirm
connectivity between the Switch and the remote device.
<ipaddr> - The IP address of the host.
times <value 1-255> - The number of individual ICMP echo
messages to be sent. The maximum value is 255. The default is 4.
timeout <sec 1-99> - The time-out period while waiting for a
response from the remote device. A value of 1 to 99 seconds can be
specified. The default is 1 second.
None.
DGS3100# ping 10.6.150.34 times 3
Pinging 10.6.150.34 with 56 bytes of data:
56 bytes from 10.6.150.34: icmp_seq=1. time=0 ms
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
20