Configuring Option 184 Support On The Dhcp Server - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Operation
Enable
configure
option
view
Enable
configure
option in interface
view
Enable
configure
option
DHCP address pool
view,
Note:
If you configure BIMS option for a global address pool, the DHCP server sends the
BIMS option information together with the lease when assigning an IP address from
the global address pool to a DHCP client.
If you configure BIMS option for an interface, the DHCP server sends the BIMS
option information together with the lease when assigning an IP address from the
interface address pool to a DHCP client.
If you specify the all keyword in the dhcp server bims-server ip command, the
DHCP server sends the BIMS option information together with the lease when
assigning an IP address from any of the interface address pools to a DHCP client.

9.5.15 Configuring Option 184 Support on the DHCP Server

You may configure suboptions of option 184 for the DHCP server in system view,
interface view, or DHCP address pool view. Whichever view you select, you must
configure interface address pools for involved interfaces.
I. Configuration prerequisites
Before configuring option 184 support on the DHCP server, make sure that:
The network parameters, and address pool and address lease allocation policies
are configured.
The DHCP client is reachable to the DHCP server.
dhcp server bims-server
ip
and
port-number sharekey key
BIMS
{ interface interface-type
in system
interface-number
interface-type
interface-number | all }
dhcp server bims-server
ip ip-address
and
port-number ]
BIMS
key
undo
bims-server
dhcp
and
pool-name
BIMS
in global
bims-server ip ip-address
port port-number sharekey
key
3Com Corporation
Command
ip-address port
to
Required.
[ port
These are three alternative
sharekey
ways of configuring BIMS
options.
dhcp server
server ip-pool
9-32
Chapter 9 DHCP Configuration
Remarks