3Com Router 3000 Ethernet Family
Configuration Guide
AUX interface
Figure 2-9 Set up a remote configuration environment
Step 2: Dial to connect the router remotely by using a terminal emulation program (such
as Windows9X HyperTerminal). In the HyperTerminal, select the RS-232 serial port of
the PC for connection, and set the terminal communication parameters similar to those
used for setting up connection through the console port:
Bits per second: 9600
Data bits: 8
Stop bits: 1
Parity: None
Flow control: None or hardware control
TermType: VT100
See Figure 2-10 and Figure 2-11.
Figure 2-10 Set the number to be dialed
Router
Tel No.12345678
3Com Corporation
Chapter 2 User Configuration Interface
Serial port
Modem
PST
N
2-6
RS-232
Workstation