3Com Router 3000 Ethernet Family
Configuration Guide
Note:
This mode applies to the scenario that the DHCP server allocates IP addresses
from interface address pools.
In this mode, you can configure a range of interfaces, and therefore can enable
DHCP accounting on multiple interfaces at a time.
III. Configuring DHCP accounting in interface view
Table 9-31 Configure DHCP accounting in interface view
Enter system view
Enter interface view
Configure the IP address
of the interface
Configure the interface to
work in DHCP server
mode
addresses
interface address pools
Enable DHCP accounting
for addresses from the
interface address pools
and configure the domain
for DHCP accounting
Note:
This mode applies to the scenario where the DHCP server allocates IP addresses
from interface address pools.
In this mode, you can enable DHCP accounting in interface view. Therefore, this
mode applies when you want to enable DHCP accounting on a single interface.
IV. Configuring DHCP accounting in global DHCP address pool view
Table 9-32 Configure DHCP accounting in global DHCP address pool view
Enter system view
Operation
system-view
interface
interface-number
ip
net-mask
and
assign
dhcp select interface
from
the
dhcp server accounting
domain domain-name
Operation
system-view
3Com Corporation
Command
interface-type
address ip-address
Command
9-30
Chapter 9 DHCP Configuration
Remarks
—
Required
Required
Required
Required
Remarks
—