3Com 3C13636 Configuration Manual page 473

3Com Router 3000 Ethernet Family
Configuration Guide
m-node: m here stands for mixed. It is the p-node embraces part of the broadcast
attributes.
h-node: h here stands for hybrid. It is b-node for which peer-to-peer
communication is available.
Perform the following configurations in the DHCP address pool view to configure DHCP
address pool.
Table 9-22 Define NetBIOS node type in global DHCP address pool
Defines NetBIOS node type for DHCP
client
Resets NetBIOS node type to the default
value
Perform the following configurations in Ethernet interface (or subinterface) view to
configure interface DHCP address pool.
Table 9-23 Define NetBIOS node type in interface DHCP address pool
Defines NetBIOS node type for DHCP
client
Resets NetBIOS node type to the default
value
Perform the following configurations in the interface view to configure multiple interface
DHCP address pools.
Table 9-24 Define NetBIOS node type in multiple interface DHCP address pools
Defines NetBIOS node type for DHCP
client
Resets NetBIOS node type to the default
value
By default, h-node is configured for DHCP client.
Operation
Operation
Operation
3Com Corporation
9-26
Chapter 9 DHCP Configuration
Command
netbios-type { b-node | h-node |
m-node | p-node }
undo netbios-type
Command
dhcp server netbios-type { b-node |
h-node | m-node | p-node }
undo dhcp server netbios-type
Command
dhcp server netbios-type { b-node |
h-node | m-node | p-node } { interface
interface-type interface-number [ to
interface-type interface-number ] | all }
undo dhcp server
{ interface
interface-number [ to interface-type
interface-number ] | all }
netbios-type
interface-type