3Com 3C13636 Configuration Manual page 982

3Com Router 3000 Ethernet Family
Configuration Guide
# Configure VLAN subinterface.
[3Com] interface ethermet0/0/0.1
[3Com-Ethernet0/0/0.1] vlan-type dot1q vid 20
# Configure the serial interface.
[3Com] interface serial 0/0/0
[3Com-serial0/0/0] ip address 168.1.1.1 255.255.0.0
[3Com-serial 0/0/0] mpls
[3Com-serial 0/0/0] mpls ldp enable
# Assign an address to the loopback interface, which will be taken as route ID.
[3Com] interface loopback 0
[3Com-LoopBack0] ip address 192.1.1.1 255.255.255.255
# Enable OSPF.
[3Com] ospf 1
[3Com-ospf-1] area 0.0.0.0
[3Com-ospf-1-area-0.0.0.0] network 192.1.1.1 0.0.0.0
[3Com-ospf-1-area-0.0.0.0] network 168.1.0.1 0.0.255.255
[3Com-ospf-1-area-0.0.0.0] network 192.2.1.0 0.0.0.255
[3Com-ospf-1-area-0.0.0.0] quit
# Configure an LDP remote peer.
[3Com] mpls ldp remote-peer 1
[3Com-remote-peer-1] remote-peer 192.1.1.2 255.255.255.255
# Configure Martini MPLS L2VPN connection.
[3Com] interface Ethernet0/0/0.1
[3Com-Ethernet0/0/0.1] mpls l2vc 192.1.1.2 20
2) Configure PE B
# Configure LSR ID, enable MPLS, LDP and MPLS L2VPN.
[3Com] mpls lsr-id 192.1.1.2
[3Com] mpls
[3Com] mpls ldp
[3Com] mpls l2vpn
# Configure the VLAN subinterface.
[3Com-LoopBack0] interface ethernet0/0/0.1
[3Com-Ethernet0/0/0.1] vlan-type dot1q vid 20
# Configure the serial interface.
[3Com] interface serial 1/0/0
[3Com-serial1/0/0] ip address 169.1.1.1 255.255.0.0
[3Com-serial1/0/0] mpls
[3Com-serial 1/0/0] mpls ldp enable
3Com Corporation
4-22
Chapter 4 MPLS L2VPN Configuration