3Com 3C13636 Configuration Manual page 68

3Com Router 3000 Ethernet Family
Configuration Guide
Table 2-17 Name an information channel
Name the information channel numbered
channel-number as channel-name
The parameter channel-number is ranging from 0 to 9, corresponding to the ten
channels of the system. The parameter channel-name is a channel name that may
comprise up to 30 characters but '-', '/' and '\'.
The system specifies the default names for Channels 0 through 5, which are listed in
the following table.
Table 2-18 Default channel names
0
1
2
3
4
5
III. Information severity
The information center classifies the information into eight levels by severity or
emergency. If filtered by severity, the information of a severity level greater than the
defined threshold will be filtered out for output. A more emergent packet has a smaller
severity level. The parameter "emergencies" represents the severity level 1 and
debugging the severity level 8. Therefore, all the information will be output if the
severity threshold is set to debugging.
Table 2-19 Severities defined in syslog
Severity
emergencies
alerts
critical
errors
warnings
notifications
Operation
Channel-number
Emergent errors
Errors requiring immediate correction
Critical errors
Errors requiring attention but not quite critical
Warnings indicating possible existence of errors
Information requiring attention
3Com Corporation
Chapter 2 System Maintenance Management
info-center channel channel-number
name channel-name
Console
monitor
loghost
trapbuffer
logbuffer
snmpagent
Description
2-20
Command
Channel-name