3Com 3C13636 Configuration Manual page 332

3Com Router 3000 Ethernet Family
Configuration Guide
[3Com-Serial1/0/0] shutdown
[3Com-Serial1/0/0] undo shutdown
# Configure Serial2/0/0.
[3Com-Serial1/0/0] interface Serial2/0/0
[3Com-Serial2/0/0] link-protocol ppp
[3Com-Serial2/0/0] ppp authentication-mode pap domain system
[3Com-Serial2/0/0] ppp pap local-user RTB password simple RTB
[3Com-Serial2/0/0] ppp mp mp-group 1
[3Com-Serial2/0/0] shutdown
[3Com-Serial2/0/0] undo shutdown
[3Com-Serial2/0/0] quit
# Configure the users in the domain to use the local authentication scheme.
[3Com] domain system
[3Com-isp-domain] scheme local
[3Com-isp-domain] quit
Verify the results on RouterA
[3Com] display ppp mp
Mp-group is Mp-group1
max-bind: 16, min-fragment: 128
Bundle Multilink, slot 1, Master link is Mp-group1
Peer's endPoint descriptor: 73b03a692ec9
Bundle Up Time:
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,
sequence 0/0 rcvd/sent
Member channels: 2 active, 0 inactive
Serial1/0/0
Serial2/0/0
Check the state about Mp-group1
[3Com] display interface Mp-group 1
Mp-group1 current state : UP
Line protocol current state : UP
Description : Mp-group1 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 111.1.1.1/24
Link layer protocol is PPP
LCP opened, MP opened, IPCP opened, MPLSCP opened
Physical is MP, baudrate: 128000
Output queue : (Urgent queue : Size/Length/Discards)
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
2005/04/08 11:20:40:970
Up-Time:2005/04/08
Up-Time:2005/04/08
3Com Corporation
1-40
Chapter 1 PPP and MP Configuration
11:20:40:970
11:20:40:970
0/500/0