Rlogin Configuration Example - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide

11.10.4 Rlogin Configuration Example

I. Network requirements
Rlogin onto a UNIX server with the IP address of 192.168.0.200 as the user zhb, and
abort the local session by pressing <Ctrl+K> or by entering a tilde (~) plus a dot (.), a
local terminal escape sequence.
II. Network diagram
Unix server Unix server
192.168.0.200 192.168.0.200
Figure 11-21 Network diagram for rlogin
III. Configuration procedure
1) Configure the Unix server
Add a user account zhb (skipped).
2) Configure the router
# Establish an rlogin connection.
<3Com> rlogin 192.168.0.200 zhb
Trying 192.168.0.200 ...
Press CTRL+K to abort
Connected to 192.168.0.200 ...
Password:
Password:
Last login: Thu Oct 28 17:30:23 from 192.168.0.5
bash: Path: command not found
[root@localhost zhb] #
# Disconnect the connection.
[root@localhost zhb] #
Enter a tilde (~) followed by a dot (.), or press <Ctrl+K>. The following is displayed:
The connection was closed by the local terminal!
eth0/0/0: eth0/0/0:
192.168.0.200 192.168.0.200
Console port Console port
3Com Corporation
11-48
Chapter 11 Terminal Services
Terminal Terminal