3Com 3C13636 Configuration Manual page 323

3Com Router 3000 Ethernet Family
Configuration Guide
[3Com] interface virtual-template 1
[3Com-virtual-template1] ip address 202.38.166.1 255.255.255.0
[3Com] interface virtual-template 2
[3Com-virtual-template2] ip address 202.38.168.1 255.255.255.0
# Assign interfaces Serial 2/0/0:1, Serial 2/0/0:2, Serial 2/0/0:3, and Serial 2/0/0:4 to
MP channels, taking Serial2/0/0:1 for an example.
[3Com] interface serial 2/0/0:1
[3Com-Serial2/0/0:1] link-protocol ppp
[3Com-Serial2/0/0:1] ppp mp
[3Com-Serial2/0/0:1] ppp authentication-mode pap domain system
[3Com-Serial2/0/0:1] ppp pap local-user router-a password simple router-a
# Configure the users in the domain to use the local authentication scheme.
[3Com] domain system
[3Com-isp-domain] scheme local
2) Configure Router B:
# Add a user for Router A
[3Com] local-user router-a
[3Com-luser-router-a] password simple router-a
# Specify the virtual-template for this user and begin PPP negotiation by using the
NCP information of this template
[3Com] ppp mp user router-a bind virtual-template 1
# Configure operating parameters of the virtual-template
[3Com] interface virtual-template 1
[3Com-Virtual-Template1] ip address 202.38.166.2 255.255.255.0
# Assign interfaces Serial 2/0/0:1 and Serial 2/0/0:2 to the MP channel, taking Serial
2/0/0:1 for an example.
[3Com] interface serial 2/0/0:1
[3Com-Serial2/0/0:1] ppp mp
[3Com-Serial2/0/0:1] ppp authentication-mode pap domain system
[3Com-Serial2/0/0:1] ppp pap local-user router-b password simple router-b
3) Configure Router C:
# Add a user for Router A
[3Com] local-user router-a
[3Com-luser-router-a] password simple router-a
# Specify a virtual-template for this user and the NCP information of the template will
be used for PPP negotiation.
[3Com] ppp mp user router-a bind virtual-template 1
# Configure operating parameters of the virtual-template
3Com Corporation
1-31
Chapter 1 PPP and MP Configuration