Disabling An Msdp Peer; Clearing Msdp Connection, Statistics And Sa Cache; Msdp Display And Debug; Displaying And Debugging Msdp - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide

5.2.13 Disabling an MSDP Peer

The session between MSDP peers can be cut off and re-activated as needed.
If a session between MSDP peers is cut off, the TCP connection will break with no retry
effort, but the configuration information will be reserved.
Perform the following configuration in MSDP view.
Table 5-15 Disable an MSDP peer
Disable a specified MSDP peer
Remove the disabling configuration
By default, MSDP peer is enabled.

5.2.14 Clearing MSDP Connection, Statistics and SA Cache

Perform the following configuration in user view.
Table 5-16 Clear MSDP connection, statistics and SA cache
Clear a specified TCP connection and
reset the
information
Clear MSDP peer statistics
Clear SA cache entries of MSDP

5.3 MSDP Display and Debug

5.3.1 Displaying and Debugging MSDP

Upon the above configuration, execute the display commands in any view to display
the running information of MSDP and to verify the effect of the configuration.
Execute the debugging commands in user view for the debugging of MSDP.
Table 5-17 Display and debug MSDP
Display the numbers of sources and
groups of SA messages from a specified
autonomous domain
Operation
Operation
counters of all MSDP
Operation
3Com Corporation
5-11
Chapter 5 MSDP Configuration
Command
shutdown peer-address
undo shutdown peer-address
Command
reset msdp peer peer-address
reset msdp statistics [ peer-address ]
reset msdp sa-cache [ group-address ]
Command
display msdp sa-count [ as-number ]