3Com 3C13636 Configuration Manual page 71

3Com Router 3000 Ethernet Family
Configuration Guide
Set the size of the logbuffer and set the
information
output to the logbuffer
Disable logbuffer or restore the default
value
Set the channel for information output to
the loghost and other parameters
Disable the information center to output
information to a log host
Set the channel number for outputting
system information to the log file
Disable the information center to output
log information to the log file
Disable the information output to the
loghost
Set the size of the trapbuffer and set the
channel for information output to the
trapbuffer
Disable the trapbuffer or restore the
default value
The system assigns six output directions each an information channel by default, as
shown in the following table:
Table 2-22 Default information channels assigned to each direction
Output direction
Console
Monitor terminal
Log host
Trap buffer
Log buffer
SNMP
Note:
The settings of the six output directions are independent but you must enable the
information center first before the settings can become valid.
Operation
channel for information
Information channel No.
0
1
2
3
4
5
3Com Corporation
2-23
Chapter 2 System Maintenance Management
Command
info-center logbuffer
{ channel-number | channel-name } |
max-size buffersize ] *
undo info-center logbuffer [ channel |
max-size ]
info-center loghost X.X.X.X [ channel
{ channel-number | channel-name } |
facility local-number
{ chinese | english } ] *
undo info-center loghost { X.X.X.X |
source }
info-center logfile
{ channel-number | channel-name } *
undo info-center logfile channel
undo info-center loghost X.X.X.X
info-center trapbuffer
{ channel-number | channel-name } |
max-size buffersize ] *
undo info-center trapbuffer [ channel |
size ]
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
[ channel
| language
channel
[ channel