3Com 3C13636 Configuration Manual page 590

Router 3000 ethernet family

Hide thumbs Also See for 3C13636:

Table of Contents

3Com Router 3000 Ethernet Family

Configuration Guide

II. Network diagram

Ethernet2/0/0

Figure 3-3 Configure RIP timer

III. Configuration procedure

For the IP address configuration of the interface, refer to Figure 3-3.

Configure RouterA:

# Enable RIP and apply it on the interface Ethernet2/0/0 of RouterA as well as on

[RouterA] rip

[RouterA-rip] network 10.0.0.0

[RouterA-rip] network 11.0.0.0

[RouterA-rip] timers update 10 timeout 30

Configure RouterB:

# Enable RIP and apply it on the interface Ethernet2/0/0 and Serial1/0/0 of RouterB.

[RouterB] rip

[RouterB-rip] network 10.0.0.0

[RouterB-rip] network 12.0.0.0

[RouterB-rip] timers update 10 timeout 30

Configure RouterC:

# Enable RIP and apply it on the interface Serial1/0/0 of RouterC.

[RouterC] rip

[RouterC-rip] network 12.0.0.0

[RouterC-rip] timers update 10 timeout 30

Ethernet2/0/0

3Com Corporation

Chapter 3 RIP Configuration

Chapters

Table of Contents

3c13636-us - router 3036 3000 series