3Com Router 3000 Ethernet Family
Configuration Guide
4.3.18 Clearing PIM Neighbors
Perform the following command in user view.
Table 4-18 Clear PIM neighbors
Clear PIM neighbors
4.4 PIM Display and Debugging
Upon the above configuration, you can use the display commands in any view to
display the running information of PIM, and to verify the effect of the configuration.
Execute the debugging commands in user view for the debugging of PIM.
Table 4-19 Display and debug PIM
Display a PIM multicast
routing table
Display the information of a
PIM interface
Display
about
routers
Display BSR information
Display RP information
Enable PIM debugging
Enable PIM-DM debugging
Enable PIM-SM debugging
Operation
Operation
the
information
PIM
neighboring
3Com Corporation
Command
reset pim neighbor { all | { neighbor-address |
interface interface-type interface-number } * }
Command
display pim routing-table [ { { *g [ group-address
[ mask { mask-length | mask } ] ] | **rp [ rp-address
[ mask { mask-length | mask } ] ] } | { group-address
[ mask { mask-length | mask } ] | source-address
[ mask { mask-length | mask } ] } * } |
incoming-interface { interface-type interface-num |
null } | { dense-mode | sparse-mode } ] *
display
pim
interface
interface-number ]
display pim neighbor [ interface interface-type
interface-number ]
display pim bsr-info
display pim rp-info [ group-address ]
debugging pim common { all | event | packet |
timer }
debugging pim dm { alert | all | mrt | timer |
warning | { recv | send } { all | assert | graft |
graft-ack | join | prune } }
debugging pim sm { all | mbr | register-proxy |
mrt | timer | verbose | warning | { recv | send }
{ assert | bootstrap | crpadv | jp | reg | regstop } }
4-14
Chapter 4 PIM Configuration
[
interface-type