Tftp Client Configuration - 3Com 3C13636 Configuration Manual

Router 3000 ethernet family

Hide thumbs Also See for 3C13636:

Table of Contents

3Com Router 3000 Ethernet Family

Configuration Guide

TFTP protocol is used to obtain the memory mirror of the system when the system is

started. Generally, the TFTP protocol is performed based on UDP.

In TFTP, file transfer is originated by the client. When it is necessary to download files,

the client end will send a reading request packet to the TFTP server, receive the

respond packet from the server, and send acknowledgement to the server. When it is

necessary to upload files, the client will send writing request packet to the TFTP server

and then send packet to the server and receive confirmation from the server. Router

works as a TFTP client.

5.4.2 TFTP Client Configuration

Perform the following operations in user view.

I. Using TFTP to download files

Table 5-15 Use TFTP to download files

Use TFTP to download files

Download files in the safe mode.

If you choose the safe mode, make sure that the current system has adequate memory

to save the files to be downloaded.

The AR 18 series does not support the sget command.

II. Using TFTP to upload files

Table 5-16 Use TFTP to upload files

Use TFTP to upload files

III. Setting relevant access control list

This task is used to set TFTP server access control list, which associates with that set

by the acl command to implement the access control over the remote TFTP server

3Com Corporation

Chapter 5 File Management

[ destination-filename ]

[ destination-filename ]

[ destination-filename ]

source-filename

Table of Contents

3c13636-us - router 3036 3000 series