Configuring Dumb Terminal Service - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
In flow mode, the async interface directly logs in to the command-line interface of a
router via the async dedicated line, and then boots Telnet Client program to log in
to other remote systems.

11.8.4 Configuring Dumb Terminal Service

The following table shows the configuration commands related to dumb terminal.
Perform the configurations of the async mode command in interface view, and of the
auto-execute command command in user interface view.
Table 11-44 Related commands for establishing dumb terminal connection
Set the async interface to work in flow
mode
Disable the async interface to work in
flow mode
Auto-execute
command on the async interface
Disable
configuration command on the async
interface
I. Dumb terminal configuration
# Configure the async interface connected with the terminal.
Configure the sync/async interface as follows:
[3Com-serial1/0/0] physical-mode async
[3Com-serial1/0/0] async mode flow
Configure 8-/16-async interface as follows:
[3Com-ui-tty1] undo modem
[3Com-async1/0/0] async mode flow
Configure AUX port as follows:
[3Com-ui-aux0] undo modem
[3Com-Aux0] async mode flow
After the above operations, press two carriage returns on the external terminal of the
async interface to enter the configuration interface of the router. During the
configuration, if you execute quit to exit from the command-line interface and want to
enter again, you must press two carriage enters.
Operation
the configuration
to auto-execute
3Com Corporation
11-40
Chapter 11 Terminal Services
Command
async mode flow
async mode protocol
auto-execute command command
the
undo auto-execute command