3Com Router 3000 Ethernet Family
Configuration Guide
Table 4-14 Configure a test timeout time
Configure a test timeout time.
Restore the default setting of test
timeout time.
By default, test timeout time is set to three seconds.
11) Configuring TTL
The configured TTL refers to the TTL of test messages. It is equal to the argument "-h"
in a ping command.
Perform the following configurations in HWPing test group view.
Table 4-15 Configure a TTL value
Configure a TTL value.
Remove the configured TTL.
By default, TTL is decided by the transmission attributes of the router.
Note:
The sendpacket passroute command voids the ttl command.
12) Configure service type
Service type is set in the ToS field of IP header. It is equal to the argument "-o" in a ping
command.
Perform the following configurations in HWPing test group view.
Table 4-16 Configure ToS
Set the ToS field.
Restore the default ToS setting.
By default, ToS is set to 0.
13) Configuring a datagram stuffing character string
Operation
Operation
Operation
3Com Corporation
4-8
Chapter 4 HWPing Configurations
Command
timeout time
undo timeout
Command
ttl number
undo ttl
Command
tos value
undo tos