Transparent Bridging On Atm - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
[RouterB-Serial1/0/0] x25 x121-address 200
[RouterB-Serial1/0/0] x25 map bridge x121-address 100 broadcast
[RouterB-Serial1/0/0] bridge-set 1

3.4.5 Transparent Bridging on ATM

I. Network requirements
Two routers are directly connected using ATM interfaces to implement transparent
bridging on ATM.
II. Network diagram
Figure 3-15 Network diagram for transparent bridging on ATM
III. Configuration procedure
Configure Router A:
[RouterA] bridge enable
[RouterA] bridge 1 enable
[RouterA] interface ethernet 0/0/0
[RouterA-Ethernet0/0/0] bridge-set 1
[RouterA-Ethernet0/0/0] interface atm 1/0/0
[RouterA-Atm1/0/0] pvc 10/50
[RouterA-atm-pvc-Atm1/0/0-10/50] map bridge-group broadcast
[RouterA-atm-pvc-Atm1/0/0-10/50] quit
[RouterA-Atm1/0/0] bridge-set 1
Configure Router B:
[RouterB] bridge enable
[RouterB] bridge 1 enable
[RouterB] interface ethernet 0/0/0
[RouterB-Ethernet0/0/0] bridge-set 1
[RouterB-Ethernet0/0/0] interface atm 1/0/0
[RouterB-Atm1/0/0] pvc 10/50
[RouterB-atm-pvc-Atm1/0/0-10/50] quit
[RouterB-Atm1/0/0] bridge-set 1
e0/0/0 e0/0/0
ATM1/0/0 ATM1/0/0
Router A Router A
3Com Corporation
3-28
Chapter 3 Bridge Configuration
ATM1/0/0 ATM1/0/0
e0/0/0 e0/0/0
Router B Router B