Configuring Dns Ip Address For Dhcp Client - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Table 9-13 Configure DHCP client domain name in global DHCP address pool
Configures a domain name to DHCP client
Delete the domain name to DHCP client
Perform the following configurations in Ethernet interface (or subinterface) view to
configure the interface DHCP address pool.
Table 9-14 Configure domain name to DHCP client in interface DHCP address pool
Configures a domain name to DHCP
client
Delete the domain name to DHCP client
Perform the following configurations in the system view to configure multiple interface
DHCP address pools.
Table 9-15 Assign domain name to DHCP client in multiple interface DHCP address
pools
Operation
Configures
name to DHCP client
Delete the domain name
to DHCP client
By default, no domain name is allocated to DHCP client.

9.5.7 Configuring DNS IP Address for DHCP Client

When the host accesses the Internet through domain name, it should translate the
domain name into IP address, which is implemented by Domain Name System (DNS).
To access DHCP client successfully into the Internet, DHCP server ought to assign
DNS IP address at the time allocating IP address to the client.
A maximum of eight DNS addresses by far can be configured in a DHCP address pool.
Perform the following configurations in the DHCP address pool view to configure global
DHCP address pool.
Operation
Operation
dhcp server domain-name domain-name { interface
a domain
interface-type interface-number [ to interface-type
interface-number ] | all }
undo dhcp server domain-name domain-name
{ interface interface-type interface-number [ to
interface-type interface-number ] | all }
3Com Corporation
9-23
Chapter 9 DHCP Configuration
Command
domain-name domain-name
undo domain-name
Command
dhcp server
domain-name
undo dhcp server domain-name
Command
domain-name